Tweet
-
-
Comment
-
Comment
-
Comment
-
Comment
-
en de tekst erbij
I was welcomed by Mr. Odwarka, "Managing Director of ALPINA US LLC". Very warm welcome. Mr. Odwarka is a German-American who worked for ten years at BMW. He is a friend of Andy Bovensiepen. The two of them left BMW and joined ALPINA in 2002. Mr. Odwarka took me to different places in manufacturing. I was allowed to take pictures, except in the development department, and in the engines test room (2 B7 engines were in test at that moment...). The activity of ALPINA can be divided into two main areas: development and production.
Development.
The development department works on those elements which are modified by Alpina, i.e:
Engines
Automated gearboxes
Aerodynamics
Brakes & Suspensions
Tyres
The typical time span to develop a new model is 2 years. The development time for the B3 3.3 to the B3 S was 18 months. Testing of pre-series include tests in the Emirates and Death Valley (USA) for hot-weather testing, Gunnison, Colorado (USA) for cold-weather testing, on BMW's Miramas road course (France), on the Nurburgring (Nordschleife), and on Michelin's road track in Clermont Ferrand for tyres.
Engines.
For each new project, many different options are examined before making any decision. Pieces are hand-made for development purposes, which will never go into production. The retained solution was a single radial compressor coupled to the crank (looks like half of a turbo), and not driven by exhaust gases (first time I heard about this solution). On the B3 S, the air intake was completely redesigned from the B3 3.3., to allow better breathing of the engine and a faster rpm increase. Many intakes were hand-made and tested before the final one was chosen. The new intake is specific for the B3 S and will not be used on the Z4 (lack of space on the front grid) .Therefore the power of the Z4 will be 300 bhp instead of 305bhp. The increased volume of incoming air lead to in turn modify the exhaust. A new 6 pipes exhaust was developed, with equal lengths for each pipe. As the engine management is much more elaborated, it requires narrowing the tolerances of BMW. For example, the volume of each cylinder must be nearly the same to allow a more consistent detonation, and a continuous effort on the crank. Therefore the tolerance (which is 0,9 % on a BMW head) is only of 0,2%-0,3% on ALPINAs. How is this achieved? This process is entirely manual: each engine block and head is polished and ported until the Top-Dead-Center cylinder volumes become almost exactly the same.
Automated gearboxes.
ALPINA develops manual gearboxes and automatic transmission together with its suppliers. These gearboxes are different in terms of software programming and also some of the hard parts are different, due to the higher torque output of ALPINA engines. On the BMW basis, BMW standard gearing is generally carried over, but often with different final drive ratios, as well as different set up for gear changes (rpm limits, rapidity of the shifting process). The end product is a gear box which is both physically and electronically different from the BMW gearboxes. Gears are different, pieces are reinforced, and management is modified.
Aerodynamics
ALPINA is, more than BMW, confronted with aerodynamic issues. All front and rear spoilers, for each new project, are tested in the BMW wind tunnel. For example, not less than 180 models of rear spoilers were developed for the new B7, which speed will exceed 290 km/h. For the B7 again, the lip of the front spoiler was modified after the road tests, when the engineers noticed that the rear differential required additional airflow. Therefore the lip was reduced by 1,5 cm in the centre of the spoiler. This lead to better ventilation below the car, but, as a side effect, decreased the ground aspiration of the car: need to again review the rear spoiler.
Brakes & Suspensions
Here, ALPINA does not make its own components (contrary to the above elements). ALPINA co-develops top-end elements with the best suppliers (Brembo, fitchel & sachs) , and tests them to fit their needs in terms of braking efficiency, comfort, handling. Fine tuning of the elements is made in close collaboration with the suppliers themselves. For example, Brembo worked with the ALPINA engineers to make the brakes of the B10 V8 S specifically for this car. Also, the brakes of the B3 S have been enhanced compared to the B3 3.3 : namely rear brakes have been increased (couldn't know other differences).
Tyres.
ALPINA works very closely with Michelin to develop specific tyres with a unique compound made exclusively for their cars. Tyres are developed after tests are made in Clermont Ferrand, on Michelin's road track. Michelin guarantees the exclusivity of these compounds to ALPINA for up to 2 years. Therefore the tyres which equip new ALPINAs are different from other Michelins with the same dimensions.
Production.
Once the development and the testing have been completed, the cars are ready to go into production. "
ALPINA orders & receives engine parts from BMW, suppliers common to ALPINA and BMW, or from ALPINA-specific suppliers . For example, the nude blocks come from BMW, but the intake, the pistons, the exhaust & the crank come from a specific supplier. Sometimes it comes from a common supplier with BMW , but with different specifications: the engine bottom is reinforced for ALPINAs.
Parts of engine that need manual treatment are processed: mainly intake and exhaust ports, the cylinders, and valve polishing.
All parts which are part of a complete engine are sent to the "engine building room": either external parts, either processed parts.
A technician is responsible for the building of an engine from top to bottom: he will assemble all parts until the full completion of the assemblage, and "sign-off" on the engine. All technicians are able to build equally 6 or 8 cylinders engines. If, later, the customer orders another automobile, the individual who assembled the first engine can be retrieved, and he will be assigned to build the new engine. (Unless he leaves…)
Once the engines are made, they are sent to BMW. ALPINA works with three BMW plants in Germany: Dingolfing, Regensburg and Munich.
Engines, as well as other specific elements (ordered by ALPINA) such are brakes, suspensions, exhaust, are assembled on BMW chassis at the BMW factory. (This is valid for all models).
Once the car goes out from the BMW factory, they are able to drive, but do not have ALPINA seats (if ordered) nor ALPINA wheels /tyres. They are sent back to ALPINA.
Cars receive, at ALPINA, wheels/ tyres, and special interior- decorative treatment. (spoilers, for example are put on by ALPINA). The interior treatment (mainly leather) can be awesome: I have seen a car completely dismantled to cover the entire interior with special leather from different colours (client in Abu Dhabi...).
That's about it, from what I could see.
We discussed of new projects with Mr. Odwarka. From what I can say, here is the news: "
The Z4 will be equipped with the 3,4 litres, 300 bhp (see above )
The B7 will be presented in Frankfurt. The tests showed an achievable power greater than the 470 bhp initially announced. Therefore the final version will have …I guess around 500 bhp.
The new 5 serie (E60) is already under development and will be presented by early 2005
The new 6 serie (E 63, will be presented at the IIA Frankfurt in Spetember 2003) is under development and will be presented by early 2006.
The roadsters are a big success in the USA, but no other model is currently foreseen.
The firm is currently building a new production plant (next to the current one) to expand the production capacity.
The marketing and sales department will be reinforced, as well as the communication. Namely, the web site will be reworked, and will offer much more technical details (I suggested Mr. Odwarka to better highlight all those development efforts and modifications from stock BMW's, as it's sometimes hard for ALPINA users to argument about how different their car are. He fully agreed and this will be done).
The expanding market seem to be (from what I saw on the parking) the Middle East, and USA with the roadsters.
Lastly, I mentioned Mr. Odwarka that I was sceptical about the announced power of B3 and B10, as they are pretty close, if not better in performance than M models. (See the "Blausause" test of the B3S and compare with M3…). He said: "we announce 305 bhp for the B3 S, but the key figure is NOT horsepower but torque, and not the peak figure, but the shape of the powerband. People often feel a higher performance level in everyday driving, and rightly so.". With good reason, I imagine.Comment
-
Hoeveel Z8-tjes staan daar wel niet
Comment
-
-
En nu maar hopen dat ze ook zo nen coupé D3 gaan maken.
De Jean Michel mag een bezoekske verwachten dan
Comment
-
pittig detail:
Alpina, meer dan een halve eeuw geleden opgericht door Rudolf Bovensiepen, produceerde oorspronkelijk... kantoortoestellen.
Comment
-
Alpina D3 touring video
Comment
-
Alpina B3S onboard video
de sound op 40 seconden als ie voorbijsteekt..... kippevel
Comment
-
Oke, voor mij zo 1 D3 touring aub, wanneer wordt ie geleverd?Comment
-
Prachtig bedrijfsbezoek
Die oude 5 serie alpina die biturbo; dit vind ik iets heel speciaals: Prachtig apparaat!!!!
greetz BmwM-opticComment
-
schitterende B3S touring in Alpina Blauw, 28000km, wel 52900 euro
Comment
-
en een Sedan voor 49.900 met 8000km op de klok, beide wagens zijn van ALPINA Burkard Bovensiepen GmbH + Co. KG, Alpenstrasse 35-37, D-86807 Buchloe
Comment
-
Man ik wil de Z4 coupé Alpina style aub!Comment
-
lol, en hunne cabrio staat ook te koop, volgens mij zijn ze ginder grote kuis aan het houden 56000 euro, 10.000km
Comment
-
Deze grote kuis van Alpina wagens zou wel es kunnen betekenen dat we binnenkort een nieuwe B3 mogen verwachten
Comment
-
ROFL
was zagen zie bovensiep? sollen wir alles nekeer heraus gooien?
hop, de Roadster S ook nog es buiten 11000 km, 45000 euro
Comment
Comment